By 
Among the most challenging problems to solve are those that are somehow invisible to our eyes. By not knowing where it comes from and not knowing precisely what is there, few are. The remaining options so we can find an answer. Fortunately, when it comes to water leaks on the wall – and even with the difficulties of observing them-there are good ways to identify them when servicing your area.
No need to break the entire house. To be aware of the waste that a leak causes, a small hole of two millimeters in the pipeline cause a loss of 3.2 thousand liters in a day. A hidden leak is, in order, to close your water clock (known as a hydrometer), leave the wall valves open, close all taps tightly and turn off all water appliances. Besides, of course, not using the toilets. Once this is done, note the visible number or mark the largest hand on the hydrometer. After an hour, check the hand or number for a change.
If the answer is yes, there is a leak in your home. In addition to showing whether there is a leak in the house, this tip also points out its severity, according to the size of the movement. The numbers or the pointer of the hydrometer. Another widely used method to determine if there is any leakage is to close the water inlet and valve from the street and all the water outlet faucets.
After that, fill a glass of water almost to the brim and place it under an open faucet (which will have its valve closed). To work, the tip of this faucet must be submerged. In the cup water, because in a few minutes, if there is any leakage in the plumbing system, the water will gradually be sucked through the faucet, leaving only the part that was not in contact with the cup.
With the faucet, because the leak sucks the available water in the pipes. Now that you know there’s a leak, you need to find out where it is. Sometimes there are clues to show where the problem is, such as seepage stains, mold, or puddles forming somewhere in the home. Other evidence is the change in the coating color or the detachment of tile and wall paintings.
But these signs are not always visible, so an excellent way to identify the location of a leak is to perform a crash test. If you know where the wall pipe is, hit it across. The length of the plumbing helps to identify the exact location as the sound of the leaking part of the wall will be different from the rest. These techniques undoubtedly help to identify if there is a leak.
Or not, avoiding an unnecessary headache or alarming about the existing problem. If the test response is positive, the best thing to do is call a plumber or check companies in my area to sort this out.
Comments