By 
If termites start to infest your home, you will need to find the right termite control brick nj method. Certain kinds of termites, like the subterranean insects, consume as much as 6.8 kilograms (fifteen pounds) of wood weekly, creating a huge quantity of damage within a short time period. Termite barriers are physical structures that stop termites from entering the foundations of properties and other areas. These cleverly designed mesh coverings and trenches prevent termites from getting into your house, via the footings, foundation or basement. This lowers the probability that they will enter your walls. Termite barriers are not chemical, termiticide or insecticide treatments.
Termites adore damp cardboard, paper and wood. If the environment you live in is naturally wet or humid, you are likely to experience termite problems at some point. If termites do manage to get into your property, mechanical alteration is an effective solution. This involves removing any cardboard, paper and wood that contacts the soil, because termites seek this out when nest building. This method also involves boosting crawlspace ventilation and repairing any leaks close to the property, to reduce moisture levels around the property.
Rocks of a certain shape can be used to form a strong termite barrier. Here, a trench needs to be dug beneath and around the foundation boundaries, prior to laying the slab. The trench is filled with granules that resemble small stones. These granules consist of minerals, like basalt or granite, that have a suitable weight and density. These stones are chosen due to their size, which stops termites from pushing them aside. Also, the insects can not bite through them or fit between them. Primarily, stone barriers work best on subterranean termites. The trench obstructs their path to the soil, which is the only way they can reach your foundation.
If your house does not have drainage systems like drain tiles, french drains or wells, soil treatment is a good termite control reston va method. This involves creating a trench, then putting a barrier beneath and adjacent to the building using termiticide. In addition, this method uses a vertical barrier to block access to the chimneys, pillars and foundation walls. When completed, the trench ought to be 15.24 cm (six inches) deep or more. The termiticide ought to be combined with water at the following ratio: 15.14 liters (4 gallons) per 3.05 meters (ten feet) of length, per foot of depth, then tipped into the trench.
A slender mesh is another type of termite barrier. This resembles a window screen used for blocking out mosquitoes. This screen should be fitted when the home is constructed. An expert installer will fold the pliable screen over the foundation slab or bricks, and against the footings and retaining walls – both above and below ground. This screen consists of fibers that the jaws of termites can not break. The weaving has tiny holes that termites can not fit their bodies through. Although this method will not always stop a termite infestation, it does greatly reduce the chance that subterranean termites will find their way into your timber walls.
When foundation or wood treatment is not possible, bait systems are a recommended alternative. With this method, you have to attract the termites’ attention by putting untreated wood into a monitoring system, which is inserted into the ground surrounding the property. Once you notice termites eating the untreated wood, you can swap this for a toxic material called termiticide bait. The insects bring this bait back to their nest, where it will kill the entire colony in due course. Also, this toxic material can be connected directly to the wooden part of the building where the termites are feeding.
Looking for a professional? Consider this termite control Orange County option.
Comments