Nothing is more frustrating than a garage door that doesn’t work properly. Whether it’s getting stuck halfway or not closing all the way, a faulty garage door can put a damper on your day. But before calling a professional for garage door opener repair, try troubleshooting the issue yourself with these simple checks.
Inspect the Photo Eyes
Photo eyes are the small sensors located near the bottom of the garage door. They work to reverse the door’s movement if something passes through the opening. Check that the photo eyes are clean and aligned properly. Dirty or misaligned photo eyes can cause the door to malfunction. Wipe them clean with a dry cloth if needed.
Lubricate the Tracks and Rollers
Over time, the tracks and rollers that guide the door’s movement can become gritty. Apply lubricant spray or silicone-based lubricant to the tracks and where the rollers connect to reduce friction. Make sure to wipe away any excess lubricant. Smoothly rolling tracks and rollers are less likely to cause issues.
Check the Door Balance
An unbalanced door puts unnecessary strain on the opener motor. Test the balance by manually lifting the door about halfway. It should stay in place or slowly close on its own. If it falls quickly, the door needs adjustment or new extension springs installed. This is a job best left to professionals.
Inspect the Cables
The cables connected to the door and opener motor are subject to wear over the years. Look for any fraying or broken strands. Frayed cables could snap and cause the door to fall. Replace any cables that show signs of damage.
Test the Opener
If the door itself seems fine, the issue could be with the opener. Press the button to open and close the door. The motor should engage smoothly in both directions. If not, the opener may need to be replaced or repaired. Resetting the opener’s limits or force settings may also help if it’s acting up.
For Smithfield residents, don’t hesitate to call a garage door company for professional garage door opener repair if the door remains problematic after checking these areas. A certified technician can thoroughly inspect all components and safely make any necessary repairs or adjustments. With some simple troubleshooting, you may be able to save yourself the service call fee and get your garage door working properly again.